Chennai-Bengaluru expressway tender features

23 Nov 2020 CW Team

The tenders which were opened on October 28 will be closed on 14 December. One can take part in this international competitive bidding process through NHAI's e-tendering portal (https://etenders.gov.in). A deadline of exactly 730 days has been set to complete the project for the concessionaire.

Per NHAI, some salient features of the Bengaluru-Chennai expressway project will be:

Advanced Traffic Management System (ADMS) which aims to provide , real-time information for users and 24X7 emergency assistance. Furthermore, ADMC aims to offer automatic vehicle classification before they enter the toll lanes to ensure that cars do not wait behind huge trucks. Trucks would be provided with a separate wider and longer lane for the toll. <.li>

A traffic volume would be displayed on a board placed near the proposed toll gate.

An within every 2 km mark along with CCTV cameras in various points. It would help to monitor vehicular movement round the clock to make tracking accidents and other crimes easier and accessible. Presently, surveillance cameras are installed only at toll plazas.

Phase III would be stretched over 25 km with no flyovers. Instead, it would cross seven major bridges over different local water bodies and a railway overbridge based near Govindavadi.

The successful bidder would report all accidents or road damage by three days and to restore the damage within 15 days.

Currently, most vehicles take at least 6 hours 30 minutes to cover the 350 km journey on the Vellore-Krishnagiri-Hosur route. On completion of the expressway project, the is expected to get reduced by at least 90 minutes.

See CW鈥檚 earlier report, 鈥淏ids opened for Bangalore-Chennai Expressway鈥�.

The National Highways Authority of India (NHAI), as part of the Bharatmala scheme, has floated a tender for Phase III of Chennai-Bengaluru Expressway project. As per NHAI, the construction of the four-lane road between Kanchipuram and Arakkonam is estimated to cost Rs 858.93 billion. The 240 km expressway will pass through several industrial and mining corridors, including the Sriperumbudur and Kolar Gold Fields. The tenders which were opened on October 28 will be closed on 14 December. One can take part in this international competitive bidding process through NHAI's e-tendering portal (https://etenders.gov.in). A deadline of exactly 730 days has been set to complete the project for the concessionaire. Per NHAI, some salient features of the Bengaluru-Chennai expressway project will be: Advanced Traffic Management System (ADMS) which aims to provide uninterrupted traffic flow, real-time information for users and 24X7 emergency assistance. Furthermore, ADMC aims to offer automatic vehicle classification before they enter the toll lanes to ensure that cars do not wait behind huge trucks. Trucks would be provided with a separate wider and longer lane for the toll. <.li> A traffic volume would be displayed on a board placed near the proposed toll gate. An emergency call booth within every 2 km mark along with CCTV cameras in various points. It would help to monitor vehicular movement round the clock to make tracking accidents and other crimes easier and accessible. Presently, surveillance cameras are installed only at toll plazas. Phase III would be stretched over 25 km with no flyovers. Instead, it would cross seven major bridges over different local water bodies and a railway overbridge based near Govindavadi. The successful bidder would report all accidents or road damage by three days and to restore the damage within 15 days. Currently, most vehicles take at least 6 hours 30 minutes to cover the 350 km journey on the Vellore-Krishnagiri-Hosur route. On completion of the expressway project, the travel time is expected to get reduced by at least 90 minutes. See CW鈥檚 earlier report, 鈥淏ids opened for Bangalore-Chennai Expressway鈥�.

Infrastructure Urban

16 May 2025

India, EU Unite for Research on Marine Plastic & Waste-to-Hydrogen

India and the European Union (EU) have launched two major research and innovation initiatives under the India-EU Trade and Technology Council (TTC). The TTC was established in 2022, by Indian Prime Minister Narendra Modi and European Commission President, Ursula von der Leyen to strengthen the bilateral partnership on trade and technology. With a joint investment of Rs 3.91 billion, the initiatives focus on two coordinated calls in the areas of Marine Plastic Litter (MPL) and Waste to Green Hydrogen (W2GH), co-funded by Horizon Europe鈥攖he EU鈥檚 research and innovation framework programme鈥�..

Infrastructure Urban

16 May 2025

Dr Ajay Kumar Takes Over as UPSC Chairman

Dr Ajay Kumar, Former Secretary, Ministry of Defence took the Oath of Office and Secrecy as Chairman, Union Public Service Commission today. The Oath was administered by Lt Gen Raj Shukla (Retd.), the senior most Member of the Commission.Having pursued a B Tech. in Electrical Engineering from the Indian Institute of Technology, Kanpur, Dr Ajay Kumar has done his MS in Applied Economics from the University of Minnesota, USA and PhD in Business Administration from Carlson School of Management, University of Minnesota, USA. He was also conferred an Hon. Doctor of Philosophy by Amity University in..

Infrastructure Urban

16 May 2025

MSME Ministry Invites Applications for National Award 2024

The Ministry of Micro, Small and Medium Enterprises (MSME) has acknowledged the significant contributions made by MSME entrepreneurs and aims to motivate and encourage them by presenting National Awards for outstanding performance. Currently, there are 35 National Awards offered to MSMEs across various categories. Special provisions have been made to recognize MSMEs led by women entrepreneurs, those belonging to Scheduled Castes (SC) and Scheduled Tribes (ST), and entrepreneurs from the North Eastern Region.Under this scheme, selected MSMEs are honored with a trophy and certificate, along with..