Rice University creates solar seeds to grow 2D perovskite crystals
28 Jun 2021
2 Min Read
CW Team
Microscopic solar seeds for growing uniform 2D perovskite crystals have been developed by researchers from the US-based William Marsh Rice University.
According to the researchers, the latest discovery is both stable and efficient at harvesting solar energy.
The team assured that the seeded growth method addresses both performance and production issues that have held back halide perovskite photovoltaic (PV) technology.
The research was published online on the Advanced Materials research portal.
The Office of Energy Efficiency and Renewable Energy at the Department of Energy (DOE), the Academic Institute of France, and the Office of Naval Research all contributed to the study. DOE facilities at Argonne and Brookhaven National Laboratories were used in the research.
Chemical engineers from George R Brown School of Engineering of Rice described how to make the seeds and use them to grow homogeneous thin films, which are highly sought-after materials with uniformly thick layers.
Homogeneous films are expected to lead to optoelectronic devices with high efficiency and technologically relevant stability, according to Aditya Mohite, a study co-author and associate professor of chemical and biomolecular engineering, materials science and nanoengineering at Rice.
Mohite revealed that Siraj Sidhik, a PhD student in his lab, came up with the idea for seeded growth.
Scientists affirmed that seed-grown, high-efficiency PV films are stable, retaining more than 97% of their peak efficiency after 800 hours of illumination without any thermal management.
Seeds are made by slowly growing a uniform 2D crystal and grinding it into a powder, which is dissolved into solvent instead of the individual precursors in the seeded growth method.
The seeded solution, on the other hand, produces films with a homogeneous, uniform surface, similar to that of the seeded material.
Marciel said that they were able to crack nucleation and growth in their group using light scattering techniques that they typically use to measure the sizes of polymers in solution.
Under certain conditions, the dynamic light scattering tool revealed that solutions reached an equilibrium state, allowing some seeds to remain undissolved in solution and eventually produce homogeneous thin films.
Also read: Rajasthan Electronics invites bids for 200,000 multi-crystalline solar cells
Also read: KELTRON invites bids to supply multi-crystalline solar modules
Microscopic solar seeds for growing uniform 2D perovskite crystals have been developed by researchers from the US-based William Marsh Rice University.
According to the researchers, the latest discovery is both stable and efficient at harvesting solar energy.
The team assured that the seeded growth method addresses both performance and production issues that have held back halide perovskite photovoltaic (PV) technology.
The research was published online on the Advanced Materials research portal.
The Office of Energy Efficiency and Renewable Energy at the Department of Energy (DOE), the Academic Institute of France, and the Office of Naval Research all contributed to the study. DOE facilities at Argonne and Brookhaven National Laboratories were used in the research.
Chemical engineers from George R Brown School of Engineering of Rice described how to make the seeds and use them to grow homogeneous thin films, which are highly sought-after materials with uniformly thick layers.
Homogeneous films are expected to lead to optoelectronic devices with high efficiency and technologically relevant stability, according to Aditya Mohite, a study co-author and associate professor of chemical and biomolecular engineering, materials science and nanoengineering at Rice.
Mohite revealed that Siraj Sidhik, a PhD student in his lab, came up with the idea for seeded growth.
Scientists affirmed that seed-grown, high-efficiency PV films are stable, retaining more than 97% of their peak efficiency after 800 hours of illumination without any thermal management.
Seeds are made by slowly growing a uniform 2D crystal and grinding it into a powder, which is dissolved into solvent instead of the individual precursors in the seeded growth method.
The seeded solution, on the other hand, produces films with a homogeneous, uniform surface, similar to that of the seeded material.
Marciel said that they were able to crack nucleation and growth in their group using light scattering techniques that they typically use to measure the sizes of polymers in solution.
Under certain conditions, the dynamic light scattering tool revealed that solutions reached an equilibrium state, allowing some seeds to remain undissolved in solution and eventually produce homogeneous thin films.
Image Source
Also read: Rajasthan Electronics invites bids for 200,000 multi-crystalline solar cells
Also read: KELTRON invites bids to supply multi-crystalline solar modules
Next Story
3i Infotech Reports Rs 7.25 Bn Revenue for FY25
3i Infotech, a leading provider of digital transformation, technology services and technology solutions, announced its consolidated financial results for the fourth quarter and full year FY25, ended on March 31st, 2025. The company maintained its growth momentum, displaying consistent progress for the 3rd consecutive quarter.In Q4 FY25, 3i Infotech reported revenue of Rs 1.87 billion, reflecting steady performance compared to Rs 1.81 billion in Q3 FY25 and Rs 1.97 billion in Q4 FY24. The company delivered strong profitability improvements, with gross margin growing by 14.8 per cent Q-o-Q and 1..
Next Story
Emerald Finance Joins Baya PTE to Boost SME Bill Discounting
Emerald Finance is a dynamic company offering a spectrum of financial products and services including its flagship Earned Wage Access (EWA) in India, has entered into a strategic partnership with Singapore-based Baya PTE through its Indian subsidiary. This collaboration aims to strengthen bill discounting services for Small and Medium Enterprises (SMEs), enabling faster access to working capital and improved cash flow management.The initiative is designed to support SMEs that supply to large corporates such as JSW Steel, Delhivery, and PVR INOX, among others. By facilitating timely invoice dis..
Next Story
BLS E-Services Crosses Rs 5 Bn Revenue Mark in FY25
BLS E-Services, a technology-enabled digital service provider, announced its audited consolidated financial results for the quarter and full year period ended 31 March 2025.Speaking about the performance and recent updates, Shikhar Aggarwal, Chairman, BLS E- Services said, 鈥淲e are delighted to report a remarkable performance in FY25, as we achieved several milestones during the fiscal year. FY25 marked our highest-ever financial performance, as we surpassed Rs 5 billion milestone in Total Income during the year, which was reported at Rs 5.45 billion, a notable YoY growth of 76 per cent. The ..