Wind turbines can be recycled environmentally: IIT Mandi researchers
13 Oct 2022
2 Min Read
CW Team
Microwaves have reportedly been used successfully by researchers at the Indian Institute of Technology Mandi to recycle polymer composites from used wind turbine blades in a quick, long-lasting, and relatively eco-friendly manner.
Polymer composites, which are typically polymer systems in which fibres like glass and carbon are incorporated for strength, are used to make the blades of wind turbines.
To recycle Glass Fibre Reinforced Polymer (GERP) composite waste, the team has developed a Microwave Assisted Chemical Recycling (MACR) procedure that is environmentally friendly. Microwaves were used to speed up the chemical breakdown of GERP composites using acetic acid and hydrogen peroxide.
The procedure is particularly unique because both hydrogen peroxide and acetic acid are environmentally friendly chemicals.
The researchers found that their method had a 97.2% epoxy decomposition rate while recovering the glass fibres. In comparison to virgin fibres, the recovered fibres had more than 90% of the other mechanical properties and nearly 99% of the strength.
鈥淭he recycling method that we have developed can lead to a profound shift in recycling technologies, which can help the country move towards a circular economy for wind turbines blades,鈥� Venkata Krishnan, Associate Professor, School of chemical sciences, IIT Mandi, said.
With a total installed wind power capacity of 40.8 GW at the end of Q2 2022, India will be the fourth largest country in the world for the installation of wind energy systems. India's wind energy potential is still largely unrealized.
According to a recent resource assessment by the National Institute of Wind Energy (NIWE), the country has a total wind power potential of 302 GW at hub heights of 100 metres and 695.50 GW at 120 metres.
Recycling might be seen as a promising solution as India struggles to repower outdated wind projects.
The decommissioned structures of these glass fiber-based turbine blades are destroyed, landfilled, or burned when they can no longer be used. These disposal techniques increase costs and environmental pollution. It almost negates the environmental advantages of wind energy. Furthermore, the cost of these composites used in wind turbine blades may increase due to landfill disposal restrictions and fluctuating raw material prices.
According to a report, 鈥楥apturing Green Recovery Opportunities from wind power in Developing Economies,鈥�, the wind energy could bring in $18 Billion gross value to India鈥檚 economy.
See also:
Mumbai airport introduces wind-solar hybrid energy for airport
Tamil Nadu establishes highest wind power capacity
Microwaves have reportedly been used successfully by researchers at the Indian Institute of Technology Mandi to recycle polymer composites from used wind turbine blades in a quick, long-lasting, and relatively eco-friendly manner.
Polymer composites, which are typically polymer systems in which fibres like glass and carbon are incorporated for strength, are used to make the blades of wind turbines.
To recycle Glass Fibre Reinforced Polymer (GERP) composite waste, the team has developed a Microwave Assisted Chemical Recycling (MACR) procedure that is environmentally friendly. Microwaves were used to speed up the chemical breakdown of GERP composites using acetic acid and hydrogen peroxide.
The procedure is particularly unique because both hydrogen peroxide and acetic acid are environmentally friendly chemicals.
The researchers found that their method had a 97.2% epoxy decomposition rate while recovering the glass fibres. In comparison to virgin fibres, the recovered fibres had more than 90% of the other mechanical properties and nearly 99% of the strength.
鈥淭he recycling method that we have developed can lead to a profound shift in recycling technologies, which can help the country move towards a circular economy for wind turbines blades,鈥� Venkata Krishnan, Associate Professor, School of chemical sciences, IIT Mandi, said.
With a total installed wind power capacity of 40.8 GW at the end of Q2 2022, India will be the fourth largest country in the world for the installation of wind energy systems. India's wind energy potential is still largely unrealized.
According to a recent resource assessment by the National Institute of Wind Energy (NIWE), the country has a total wind power potential of 302 GW at hub heights of 100 metres and 695.50 GW at 120 metres.
Recycling might be seen as a promising solution as India struggles to repower outdated wind projects.
The decommissioned structures of these glass fiber-based turbine blades are destroyed, landfilled, or burned when they can no longer be used. These disposal techniques increase costs and environmental pollution. It almost negates the environmental advantages of wind energy. Furthermore, the cost of these composites used in wind turbine blades may increase due to landfill disposal restrictions and fluctuating raw material prices.
According to a report, 鈥楥apturing Green Recovery Opportunities from wind power in Developing Economies,鈥�, the wind energy could bring in $18 Billion gross value to India鈥檚 economy.
See also: Mumbai airport introduces wind-solar hybrid energy for airportTamil Nadu establishes highest wind power capacity
Next Story
Himachal Pradesh Hosts Workshop on AI for Good Governance
The Department of Digital Technologies and Governance (DDT&G), Government of Himachal Pradesh, in collaboration with the National e-Governance Division (NeGD) under the Ministry of Electronics and Information Technology (MeitY), organised a state-level workshop titled 鈥淎I for Good Governance: Driving Transparency, Efficiency, and Impact鈥� on 20 May 2025 at the HP Secretariat, Shimla.The workshop aimed to enhance AI adoption in governance by sensitising over one hundred senior officials from various state departments. It highlighted AI鈥檚 role in data-driven policymaking, optimising ser..
Next Story
DPIIT Extends Timeline for Safety Order on Electrical Appliances
The Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry, has extended the implementation timeline for the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025. This decision follows stakeholder consultations chaired by Union Minister of Commerce and Industry Shri Piyush Goyal.The revised Quality Control Order (QCO) will come into force on 19 March 2026 for domestic large and medium enterprises and foreign manufacturers. The QCO covers electrical appliances intended for household, commercial, or similar us..
Next Story
Mumbai Metro Lines Four and Four A Set For Trial Runs Soon
The Mumbai Metropolitan Region Development Authority (MMRDA) is preparing to launch trial runs on a key 10-kilometre stretch spanning ten stations from Cadbury to Gaimukh on Metro Lines Four and Four A. These stations include Cadbury, Majiwada, Kapurbawadi, Manpada, Tikuji Ni Wadi, Dongripada, Vijay Garden, Kasarvadavli, Gownipada, and Gaimukh.While the designated depot for Metro Lines Four and Four A is still under construction, the MMRDA has devised an interim plan involving inspection pits beyond the Gaimukh terminal to facilitate early testing.Metro Line Four, which stretches 32.32 kilomet..